![]() On the Maxima this is the upper line (without the “banjo” bolt). To do this you have to locate the fluid return line. For optimal cooling effect the auxiliary transmission cooler should be mounted in front of the A/C condenser.Ĥ.The cooler should be installed in “series” with the stock tranny cooler. Ask specifically for transmission fluid hose!ģ.The picture below shows the A/C condenser before installation of the cooler. When you get the extra hose, DO NOT get fuel line, it is not the same. The 4 feet of hose that comes with the cooler is not enough, since you will have to replace the stock transmission return line entirely. I bought an extra 4 feet of transmission cooler hose (not pictured) to use as the return line back to the transmission. ![]() In fact, the 403 would probably have been easier, as it is the same height, but 2.5 inches shorter.Ģ.Here is everything that came in the kit. ![]() I would not recommend getting a cooler any larger than the 404, as it will be too big and difficult to install. It is supposed to lower your transmission fluid temperature by 70 degrees Farenheit. The 404 is considered “Heavy Duty” and is 7.5 inches tall by 15.5 inches wide, by 0.75 inches thick. There were other smaller models, but I figured I would get the largest one practical. 1.I bought the Hayden model 404 from Pep Boys for $49.99 plus tax.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |